Category 07 / Explosion-Proof Enclosures
Explosion-Proof Enclosures
Empty certified enclosures built in-house for OEMs, panel builders, and system integrators. Available in Ex d flameproof (ⅡB/ⅡC) and Ex e increased safety protection types, each enclosure is machined, drilled, and assembled to your terminal layout, gland plate specification, and mounting requirement. Aluminium alloy or SS316, IP66, with full ATEX / IECEx certification traceability on every shell.
3 enclosure families in this category ·
Ex e Increased Safety · Ex d ⅡB · Ex d ⅡC · MOQ 1 · Drill-to-spec available
Empty Enclosure · Ex e Increased Safety
Ex e Series
Ex e IIC T6 Gb
- For terminal boxes and junction assemblies with no arcing/sparking components inside
- Aluminium alloy or SS316 enclosure, IP66 · ambient −40°C to +55°C
- Custom gland plate: drilled, tapped, and labelled to your terminal layout drawing
- Internal DIN rail and earth stud pre-installed · G / NPT / M entries
- ATEX / IECEx component certificate supplied with every shell
Empty Enclosure · Ex d Flameproof ⅡB
Ex d IIB Series
Ex d IIB T6 Gb
- Flameproof enclosure for ⅡB gas group: ethylene, propane, and common refinery gases
- Cast aluminium alloy body and cover with precision-ground flamepath (spigot or flat)
- Standard sizing from 200×200×150 mm to 800×600×350 mm · larger on request
- Multiple conduit entries per face · blank, drilled, or tapped to your specification
- Internal mounting plate included · hinge and captive bolt cover options
Empty Enclosure · Ex d Flameproof ⅡC
Ex d IIC Series
Ex d IIC T6 Gb
- Full ⅡC gas group: hydrogen, acetylene, carbon disulphide · tightest flamepath tolerances
- Higher-grade aluminium alloy or SS316 casting with CNC-finished flameproof joints
- Sizing from 200×200×150 mm to 600×500×300 mm · custom dimensions available
- Threaded flamepath (cylindrical or flat) with hydrostatic pressure test report per unit
- Every shell traceable to its casting batch and ATEX / IECEx component certificate
Start a Configuration
Your Configuration.
Your Timeline. Your Terms.
Send us your specifications — a drawing, a spec list, or a photo of the unit you're replacing. We'll configure, quote, and keep you updated at every step.
Start Your Configuration → Or send a detailed inquiry
Typical quote: < 24 h·
MOQ: 1 unit·
Custom nameplates: standard