Category 06 / Explosion-Proof Fittings
Connectors & Couplers
The mechanical backbone of every hazardous-area conduit run. Cable glands, flexible conduits, compression seals, unions, pipe couplings, and stuffing glands that keep flame paths intact across every joint and entry point. Available in brass, nickel-plated brass, and SS316 with G, NPT, and Metric thread standards.
7 product families in this category ·
Ex d IIC · Ex eb IIC · Ex ta IIIC · IP65–IP66 · WF1–WF2 ·
Brass, nickel-plated brass, carbon steel, SS316 ·
G / NPT / Metric thread standards
Explosion-Proof Cable Gland
Ex d IIB/IIC Gb
Ex eb IIC Gb
IP65 · WF1
- Universal cable entry gland for unarmoured and armoured cable
- G, Metric, and NPT thread standards — ⌀11–55mm cable range
- Brass, nickel-plated brass, or SS316 body
- Flameproof (Ex d) + increased safety (Ex eb) dual protection type
- Sealing ring compression design maintains IP65 integrity
Explosion-Proof Flared Connector
Ex d IIC Gb
Ex eb IIC Gb
IP65 · WF1
- Flared entry geometry guides cable through smooth bend radius
- G, Metric, and NPT thread options — ⌀11–55mm cable range
- Brass or SS316 construction with anti-galling thread treatment
- Ideal for tight-radius conduit-to-equipment transitions
- Ex d + Ex eb dual certification for Zone 1 / Zone 2 applications
BNG Series Explosion-Proof Flexible Conduit
BNG Series
Ex d IIB/IIC Gb
IP66 · WF1
- Flameproof flexible conduit for motor and field-equipment connections
- Type A/B/C end-thread configurations (M-F, F-F, M-M)
- G1/2–G4, NPT1/2–4, M16–M110×1.5 — ⌀10–75mm inner diameter
- Rubber-lined inner hose with optional SS304 overbraid
- Absorbs vibration and misalignment in rigid conduit runs
BQD Series Explosion-Proof Cable Compression Gland
BQD Series
Ex d eb IIC Gb
IP66 · WF2
- Double-compression seal for SWA/STA armoured cable clamping & retention
- Inner armour cone locks the wire braid, outer seal maintains flamepath
- G1/2–G4, NPT1/2–4, M16–M115×1.5 thread range
- WF2 deluge-proof rating for offshore and coastal installation
- Brass or SS316 body with field-replaceable sealing elements
BHJ Series Explosion-Proof Union Coupling
BHJ Series
Ex d IIC Gb
IP66 · WF1
- Detachable three-piece union for conduit runs requiring maintenance access
- Type A/B/C/D end-thread variants including reducer (D)
- Carbon steel zinc-plated or SS304/SS316 body
- G1/2–G4, NPT1/2–4, M16–M110×1.5 thread range
- Flameproof joint meeting IEC 60079-1, no disassembly of conduit required
BGJ Series Explosion-Proof Pipe Coupling
BGJ Series
Ex d IIC Gb
IP66 · WF1
- Rigid fixed coupling for permanent joint in conduit or pipe systems
- Type A/B/C/D variants: F-F, M-F, M-M, and reducer (D)
- Carbon steel zinc-plated or SS304/SS316 body
- G1/2–G4, NPT1/2–4, M16–M110×1.5 thread range
- Flameproof joint per IEC 60079-1 for Zone 1 / Zone 2 rigid conduit
BTL Series Explosion-Proof Stuffing Gland
BTL Series
Ex d eb IIC Gb
IP66 · WF2
- Compression stuffing box for armoured and unarmoured cable entry
- Multi-layer sealing with field-replaceable packing rings
- G1/2–G4, NPT1/2–4, M16–M115×1.5 thread range
- WF2 deluge-proof rating for offshore and coastal environments
- Brass or SS316 body, IECEx / ATEX certified flame barrier
Need a Spec-Specific Connector?
Send us your cable schedule or conduit layout. Thread type, material grade, armoured/unarmoured — we’ll match the right gland or coupling. Typical quote < 24 h.
Start a Configuration →