CONDUIT OUTLET BOXES & SEALING FITTINGS
BCG Series Explosion Proof Sealing Fitting
Ex db IIC Gb
Ex tb IIIC Db
The BCG Series Explosion Proof Sealing Fitting closes a selected point in a conduit run to limit flame and gas migration. Choose the L, H or P orientation, then match the G, NPT or Metric thread and DN size to the installation. The same page also covers the conduit-seal use case often searched as an explosion proof seal off.
- Ex db IIC Gb gas-protection marking and Ex tb IIIC Db dust-protection marking
- Three mounting orientations: L vertical, H horizontal and P drain
- G1/2 to G4, NPT1/2 to 4 and M16 to M110×1.5 thread ranges
- DN15 to DN100 conduit size range
- IP66 ingress protection for the listed sealing-fitting configuration
- Used to limit flame and gas migration through a selected conduit point; confirm local approval before order
Technical Specifications
Size the BCG Sealing Fitting by Orientation, Thread and DN
Confirm the mounting orientation, thread standard, conduit size and local approval required at the sealing point.
| Parameter | Specification |
|---|---|
| Protection Marking (Gas) | Ex db IIC Gb |
| Protection Marking (Dust) | Ex tb IIIC Db |
| Mounting Orientation | L (Vertical) / H (Horizontal) / P (Drain) |
| Conduit Size | DN15 to DN100 |
| Thread Range | G1/2 to G4 / NPT1/2 to 4 / M16 to M110×1.5 |
| Ingress Protection | IP66 |
| Application | Conduit sealing to limit flame and gas migration |
